Ever wondered how much of a difference a high-quality cold air intake can make on your Pontiac GTO? This video from DiabloFormula Racing dives into the transformative power of CAI’s Cold Air Intake system, showcasing noticeable performance gains.
Let’s break down the key highlights and takeaways from the test.
The Power Of Cold Air: A Closer Look
Installing the wrong cold air intake may be even worse than sticking with a stock unit. Many aftermarket intake systems are made from injection-molded plastic and are not sealed or insulated, which can actually reduce your car’s performance. At Cold Air Inductions, our kits include:
Inspection window on certain kits – great to check the reusable air filters
Powder-coated aluminum components to reduce intake temps
Perfectly insulated air boxes to maximize cold airflow
OEM-spec fasteners and connectors
We also retain the stock OEM sensors, making our kits easy to install in just about 30 minutes. Every cold air intake system is built to the highest quality – that’s why we’re a Tier 1 OEM supplier. Our intakes are tested to ensure they deliver real performance gains, including:
Immediate HP Increase: You get a noticeable horsepower (HP) boost provided by CAI’s Cold Air Intake system.
Enhanced Engine Efficiency: Cooler air can not only improve performance but enhance your GTO’s engine efficiency.
Seeing Is Believing: The Video Breakdown
In this video, DiabloFormula Racing takes us through the journey of upgrading a 2005-2006 Pontiac 6.0L V8 GTO with a CAI Cold Air Intake. The GTO was tuned and dyno-tested before the CAI intake installation. After installation, the GTO saw an increase of 5hp and 3ft-lbs of torque without ANY additional tuning. From unboxing to the final roar of the engine, it’s a testament to the tangible benefits of quality aftermarket parts.
Take Your GTO To The Next Level
“With CAI’s intake, we’re not just talking about numbers; we’re talking about a driving experience transformed.”
Ready to experience these benefits on your Pontiac GTO or other performance vehicle? Check out our selection of cold air intakes and find the perfect fit. With CAI, you’re not just upgrading your car; you’re getting the following benefits that will enhance your driving experience:
Proven Performance: Our intakes are dyno-tested with results to back up our claims.
Quality Materials: Only the highest quality materials are used to ensure durability and efficiency.
Easy Installation: Designed for a straightforward install, getting you back on the road faster.
For more information and to view our full range of products, visit Cold Air Inductions or click the button below.
https://www.coldairinductions.com/wp-content/uploads/2018/04/Capture.png434845James Newsomehttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngJames Newsome2024-03-18 14:28:052024-04-19 13:15:43Do All Air Intake Systems Provide Performance Gains?
If you own a fifth- or sixth-generation Camaro, there are plenty of great mods you can do to enhance its performance and looks. Even a base Camaro is a potent vehicle, the 3.6-liter V6 pumps out between 304 and 335hp depending on the model year, and the 6.2-liter V8 makes up to 455hp in stock form. The supercharged V8, meanwhile, delivers a sledgehammer 650hp.
But more is always better, and Motor Fire put together a great video showing five of the best mods that will give you the extra power and visual edge to let your Camaro stand out from the crowd.
Check out this video by Motor Fire, demonstrating the benefits of our CAI cold air intake in 6th Gen V8 Camaro:
For a stock look that takes just minutes to install, the CAI cold air intake is your only choice. Motor Fire mentions that you get better throttle response, more power, and improved fuel economy. All without needing to tune the ECU.
2.) Oil Catch Can
The second-best upgrade is also under the hood. It is an oil catch can that reduces carbon build-up on the intake valves and increases air turbulence to improve oil separation. It’s one of the cheapest and best mods you can do to extend the life of your engine. Installation time is just 20 minutes.
3.) Aftermarket Exhaust
Replacing your restrictive stock exhaust with a free-flowing aftermarket system will improve your car’s exhaust sound and unleash a few more horses in the process. Doing a full cat-back exhaust isn’t a cheap upgrade, but it is the most comprehensive way to add power and unleash your Camaro’s sound. After all, you get what you pay for.
A more cost-effective route is to do an axle-back muffler replacement. This will enhance the exhaust sound and the upgraded tailpipe tips will look great, too. There are plenty of different systems out there, so pick the one that works best for you.
4.) New Wheels
Replacement wheels aren’t going to enhance your Camaro’s acceleration, but they will definitely improve its looks. Motor Fire recommends Z28 wheels because they look great on any Camaro, but if your budget is tight, powder coating factory wheels is also an option.
Fitting larger diameter or wider wheels will really enhance your car’s looks and can also improve handling and grip levels. Just remember that fitting very low profile tires can make the ride much harder over bumps.
5.) Body Kits and Ground Effects
Some Camaros come with aero components from the factory. If yours didn’t, adding them to a stock car can instantly enhance the aesthetics of even a base V6 Camaro.
Adding splitters, side skirts and a rear wing can give your car a very racy and aggressive look, and unless you go for a pure carbon-fiber option, it can also be reasonably cost effective.
Get The Best Cold Air Intake On The Market For Your Camaro
Whatever upgrade you plan for your Camaro, make sure to install a cold air intake first. Cold Air Inductions is the leading manufacturer of sealed air box intake systems, and we offer a lifetime warranty. We use real-world dyno testing procedures to deliver real-world benefits. Our systems fit without any changes to the OEM sensors or connections.
https://www.coldairinductions.com/wp-content/uploads/2019/05/camaro.jpg351600James Newsomehttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngJames Newsome2024-03-07 08:52:142024-04-18 16:06:40The First Mods You Should Make On A Chevy Camaro
When it comes to aftermarket cold air intakes, performance enthusiasts are spoiled for choice. However, not all cold air intakes are created equal. Some air intakes are made by companies that supply parts to OEMs (like we do).
Our journey from an aftermarket innovator to a tier 1 OEM supplier is a testament to our commitment to quality and innovation. In this blog post, we’ll explore what it means to be a tier 1 OEM supplier, why we don’t make our cold air intake kits out of plastic, and how these things make our products different.
What It Means To Be A Tier 1 OEM Supplier
First, let’s clarify what a Tier 1 OEM supplier is:
If you make parts or assemblies that are used to build or modify a new vehicle, than you’re an OEM supplier
If you make parts or assembles that are used to build or modify a new vehicle – and you sell them directly to the automaker – than you’re a Tier 1 OEM supplier
Being an OEM supplier is great, as it means you make a quality product. But being a Tier 1 supplier is better: Not only are you making a high quality product, you’re also certifying that every one of your products will meet the automaker’s very high standards.
A typical OEM supplier will send parts to someone else, and then that party will do the testing and the quality control. Typical OEM suppliers have a little bit of latitude to make mistakes. Tier 1 suppliers (like our company) have no latitude. The buck stops with us.
It’s hard to become a Tier 1 supplier, and even harder to maintain that status. Most companies don’t bother, and we think that says something about their commitment to quality.
Here’s Why The Quality Of Every Intake Really Matters
A lot of people think about air intake kits the same way they think about plumbing: A bigger air intake tube can flow more air, so a bigger intake is better.
However, the size of the air intake tube is basically determined by engine displacement: At wide open throttle (WOT), your engine can only use a specific volume of air. Bigger engines need bigger intake tubes, and smaller engines need smaller intake tubes. Any inconsistency in the size of the tubing is bad:
Too much air flow from an oversize tube means the engine runs lean, reducing power and risking engine damage
Too little air flow from an undersize tube means the engine runs rich, wasting fuel and losing power
In other words, what you really really want from your air intake tube is precision. The air intake tube needs to flow a very specific volume of air. That means the tube needs to have a uniform thickness and cross-sectional area from one end to the other. Any variations or inconsistencies will change air flow and impact performance.
And Here’s Why We Don’t Make Our Intakes From Plastic
So we told you all of that business about being a tier 1 supplier and air intake tubing to tell you this: It’s very very difficult to make a quality air intake tube out of plastic without spending a lot of money.
1. Factory Air Intakes Are Almost Always Injection Molded Plastic
Most OEM air intakes are injection molded plastic for a couple of reasons:
Injection molding is fairly precise – definitely good enough for an air intake
Injection molding is very consistent from piece to piece, which is also really important (as explained above)
The trouble is that injection molds are extremely costly – $1 million+ per mold. If you’re an automaker manufacturing hundreds of thousands of parts with the same mold, the cost per piece is pretty good. But if you’re a small aftermarket air intake manufacturer? You can’t afford to spend millions on molds.
2. Most Aftermarket Air Intakes Are Roto-molded Plastic
Rotational molded plastic (aka roto-molded plastic) is what most companies use for their air intake tubing because roto-molding is a very affordable. A roto-mold costs 1/20th as much as an injection mold. This means that, instead of spending $1 million on an injection mold like an automaker would, after-market air intake manufacturers spend $50,000+ on a roto-mold.
The trouble is, roto-molding is very inconsistent. Roto-molding works by pouring hot plastic into a mold and then spinning the mold as the plastic cools. In theory, the plastic will cool uniformly and piece will be good enough. In reality:
Roto-molded plastic will have different thicknesses in different spots, as it’s hard to get the molten plastic to flow consistently
Roto-molded plastic does not cool uniformly, which means the interior surface of the tube has lumps and thin spots
The cross-sectional area of a roto-molded air intake tube will vary as much as 8% from one end to the other, which means air flow can vary as much as 8% from one kit to the next
As a Tier 1 supplier, we can not make air intake tubes out of roto-molded plastic. Our product would never pass quality control. It would be too inconsistent from kit to kit: Some people would get a kit that was perfect sized and worked great, and some people would get a kit that flowed the wrong amount of air and didn’t work at all.
By the way, if you’ve ever wondered why some people say the cold air intake kits are great, and other people say they don’t work or don’t make a difference, now you know why.
3. Also, Plastic Is An Insulator That Retains Heat
The other reason we don’t use plastic: It’s an insulator. As the engine compartment warms up, any plastic under the hood warms up too. And once a plastic air intake tube warms up, it stays warm because it’s an insulator.
Of course, a metal intake tube under the hood will also warm up. However, metal doesn’t have the insulating properties of plastic. As more air flows into the engine, the air intake cools down. And here at Cold Air Inductions we also thermally insulate our air intake tubing with a special coating, further improving the thermal properties.
1. Metal Construction. Metal has better thermal properties than plastic. It’s also stronger and will last longer than roto-molded plastic, which can shatter or crack over time.
2. Consistent Intake Tube Diameter: Air intake tube diameter is arguably the most important aspect of a performance air intake. If the tube flows a little too much air – or not quite enough – it will not perform correctly at wide open throttle (WOT). Roto-molded plastic air intake kits have a lot of problems with oversize or undersize tubing because of the way they’re made. In fact, almost all roto-molded parts have a section that’s too thin or too thick, throwing off the air flow by a significant amount.
3. Lifetime Warranty. If an air intake is well made, it should last the lifetime of the vehicle or longer. And a good Lifetime Warranty should NOT have exclusions for normal off-road use, track use, or commercial use. A “lifetime” warranty with a bunch of exclusions isn’t.
4. Premium Reusable Air Filter That’s Made In The USA. Several companies offer engine air filters that are re-usable, but it’s important to verify the filter itself is Made in the USA. Imported filters often use inferior quality filter media to keep costs down, but the consequence of a cheap air filter is either poor performance or poor filtration. Poor performance is no fun; poor filtration can cause long-term engine damage. We wouldn’t ever recommend an air intake kit without a US-made air filter.
We’re A Tier 1 Supplier Because We Make A Great Product
Finishing where we started, the secret to our success as a company has been our dedication to quality and innovation. And the evidence of our dedication is our status as a tier 1 OEM supplier.
Being a tier 1 supplier isn’t easy. A lot of companies can’t or won’t do it because of the strict quality requirements. But every one of our products is designed and manufactured to meet or exceed rigorous specs, and we document every step of the process.
We know we’re biased, but we think we make the best quality cold air intake kits in the industry. Our customers rate our products very highly, and we do business with some of the biggest automakers in the world. Why buy from anyone else?
https://www.coldairinductions.com/wp-content/uploads/2024/02/gtos-intakes.jpg300640coldaihttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngcoldai2024-02-28 15:28:282024-04-18 15:37:07What Does It Mean To Be A Tier 1 OEM Supplier?
Performance cars are built with high quality parts, but that doesn’t mean that there isn’t room for improvement. The sixth generation Chevy Camaro SS is already an impressive performer. It comes stock with a 455hp 6.2-liter V8 that can launch it from 0-60mph in just 4.5-seconds.
It can also cover the quarter mile in just over 12-seconds. That’s quick even for modified V8s. Bad Bowtie Productions decided to take their 2016 Camaro SS to the dragstrip to find out what it would do stock. Then they installed a CAI Cold Air Intake to see whether it made a difference. Read on to find out.
Stock Runs
First off, they did three stock passes to get a baseline:
ET 12.03@116mph
ET 12.01@117mph
ET 11.99@117mph
The baseline average works out to an elapsed time of [email protected]. Those are pretty healthy numbers for a bone stock Camaro SS. Clearly the track surface and car were as good as it was going to get. The car was left to cool down for an hour, during which the CAI Cold Air Intake was installed. The entire process took just 15 minutes with basic tools.
It was then driven straight to the drag strip without waiting for the ECU to recalibrate to the additional airflow.
CAI Intake Runs
The Bad Bowtie Productions crew then did three passes with the new CAI kit installed and reached an average elapsed time of [email protected]:
There are plenty of cold air induction kits on the market. What makes CAI stand out is the attention to detail and quality of every product we sell. Every kit is supplied with everything you need for a hassle-free installation. We use OEM-quality fittings and keep all original sensors.
Inspection window to check reusable air filters
Powder-coated aluminum parts to reduce intake temps and enhance performance
Air boxes designed to maximize cold airflow and OEM sensors are reused
Upgrading to a CAI Cold Air Intake is quick and easy thanks to our custom designed products and simple installation procedure. Our intakes are designed to last, and the reusable air filter element will save you money, too. Our popular 6th Gen Camaro intakes include:
Whether you choose the Elite Carbon Series intake systems like Bad Bowtie Productions did for their Camaro SS, or the Elite Series intakes, CAI products are the perfect upgrade for any OEM setup.
Cold Air Inductions is a leading manufacturer of cold air intakes. And we stand by our products with a lifetime warranty. Get in touch with our team to order your kit today.
https://www.coldairinductions.com/wp-content/uploads/2017/12/Capture.png407843coldaihttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngcoldai2024-02-14 19:37:162024-04-18 15:28:21Back To Back Test: CAI Intake On A 2016 Camaro SS
The Chevrolet Camaro ZL1 is one heck of a car. It’s responsive, powerful, and has the speed to back up its incredible looks. But if you own one, you’re probably always looking for ways to improve it, get a little more performance, or make it really stand out.
An easy way to accomplish all of that is with our Elite Carbon Series cold air intake. In the video below, we turn to Lonestar Hawaiian on YouTube for an in-depth look at installing this system in his dream car, the Camaro ZL1.
Check Out The Carbon Elite CAI Camaro Cold Air Intake
“Everybody needs a little carbon fiber in their life.”
– Lonestar Hawaiian
As Lonestar Hawaiian says, this cold air intake is a great way to add a little carbon fiber to your life. It fits any 2017 to 2021 Chevy Camaro ZL1 with a 6.2-liter V8 engine and comes with an airbox, intake tube, air filter, coupler, stainless steel clamps, and installation manual. The airbox features a clear plexiglass window that helps you monitor the condition of your air filter and adds some major style points when you pop the hood.
The Elite Carbon Series takes that style to a whole new level. The system produces the same great benefits as the Elite Series system, but the air box and intake tube pieces are constructed from carbon fiber, which looks great and is lightweight, strong, and resistant to temperature changes. It naturally maintains a cooler temperature than a metal or plastic intake, which improves your power and fuel efficiency even more, making it the perfect solution for your Camaro.
Installing A Cold Air Inductions Camaro Cold Air Intake
Installing one of our cold air intake systems for your Camaro is pretty simple, typically requiring less than 30 minutes to complete the following steps:
First, disconnect the negative battery terminal, which will help reset the system.
Loosen the hose clamps and unscrew the MAF sensor from your factory air intake tube.
Slide the air intake tube off of the throttle body and remove the air box and tube.
Then, follow the instructions to hook up your new cold air intake. Remember to
If you watched Lonestar Hawaiian’s video, you saw that one of the best features of this cold air intake system is that it is designed to bolt right into place. In practically no time, he had it hooked up and his Camaro back on the road.
Lonestar Hawaiian notes in his video that it may not dramatically change your fuel economy. But who cares about gas efficiency when you’re talking about increasing power and performance?
Why Should You Have A Camaro Cold Air Intake?
No matter how you slice it, the Chevrolet Camaro ZL1 is one heck of a car. It’s powerful, fast, responsive, and looks incredible. A cold air intake is a ridiculously easy way to eke out a little more performance, particularly our Elite Carbon Series cold air intake.
Cold Air Inductions has been a leading manufacturer of sealed air box intake systems since 2004. We offer a lifetime product warranty and do real power testing to ensure our intake kits deliver noticeable improvements over stock performance.
Contact us to order your Camaro CAI cold air intake kit today!
https://www.coldairinductions.com/wp-content/uploads/2021/06/intake-carbon-elite-cai-1.png480825coldaihttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngcoldai2024-01-22 13:54:002023-11-02 11:44:45Easy Camaro Power Adder: The Cold Air Inductions Intake
If you’re a proud owner of a Chevy Camaro and looking to enhance its performance and style, upgrading certain components can make a significant difference. From boosting horsepower to improving aesthetics, these upgrades can transform your Camaro into something unique.
Among the various options available, a cold air intake from Cold Air Induction (CAI) stands out as the top choice, but other things may also improve your Camaro, including suspension upgrades, new wheels/tires, body kits and window tint. Let’s delve into the benefits of each upgrade.
Upgrading the suspension of your Chevy Camaro is a surefire way to enhance both handling and ride quality. Performance-oriented suspension components like upgraded shocks, struts, springs, and sway bars can minimize body roll, improve cornering ability, and provide a more responsive and comfortable ride. By investing in a quality suspension upgrade, you’ll experience improved stability and control during aggressive driving, making your Camaro a joy to maneuver on the road or track.
2. Wheels and Tires: Amping Up Style And Performance
Swapping out the factory wheels and tires for high-performance counterparts can not only elevate the aesthetics of your Camaro but also enhance its grip and handling. Performance wheels made from lightweight materials reduce unsprung weight, leading to better acceleration, braking, and cornering capabilities. Pairing these wheels with high-performance tires engineered for improved traction and grip completes the package, allowing you to fully exploit your Camaro’s power and performance potential.
3. Performance Intakes: Boosting HP And Sound
One of the most gratifying upgrades for any Camaro owner is a cold air intake system. A high-quality intake kit optimizes air flow, allowing the engine to breathe more freely. This results in increased horsepower and torque, accompanied by a more pronounced engine sound (especially when you step on it) that exudes power and performance. Besides the performance gains, a well-designed intake kit can turn heads and give your Camaro engine bay an stand-out look. You can check out Cold Air Inductions high-quality intake intake kits for Camaros here.
4. Window Tint: Enhancing Aesthetics And Comfort
While not directly related to performance, window tinting is an upgrade that adds to the overall appeal and comfort of your Chevy Camaro. Tinted windows provide several benefits, including blocking harmful UV rays, reducing glare, and enhancing privacy. Additionally, window tinting helps regulate the interior temperature by minimizing heat buildup, ensuring a more comfortable driving experience, especially during hot summer months.
5. Body Kits: A Sleek And Unique Look
Body kits are meticulously designed to reduce air resistance, allowing the car to achieve better speed and fuel efficiency. They also help in channeling airflow in a manner that can keep the vehicle more grounded, providing enhanced stability at high speeds. Adding components such as front and rear bumpers, side skirts, and sometimes even a spoiler, provide a more aggressive and sporty look to the Camaro, making it stand out on the road. Besides the functional benefits, a body kit can significantly increase the resale value of the car, appealing to enthusiasts who appreciate a customized appearance.
Camaro Cold Air Intake Kits From Cold Air Inductions
Cold Air Induction systems are designed to provide noticeable performance improvements for the Chevy Camaro and come with a lifetime warranty. Our cold air intakes replace the stock intake with a more efficient design, drawing cooler air into the engine and increasing both horsepower and torque. By optimizing airflow, a CAI system helps your Camaro breathe easier and perform at its peak, improving throttle response and overall engine efficiency.
Contact us to order your CAI cold air intake kit today.
Cold air intakes are an inexpensive way to increase your truck’s performance, providing better towing and gas mileage while improving its sound. The key is finding a high-quality system that cools and improves airflow.
That’s why GuitarmageddonZL1 chose an intake system from Cold Air Inductions and says it should be the first performance mod on your truck. We’ll cover the highlights of their video in this post and explain what makes our cold air intakes stand out from the competition.
Cold Air Inductions Chevy Silverado Intake Install
GuitarmageddonZL1 installed a Cold Air Inductions cold air intake on his new Chevrolet Silverado, which was the first performance modification he did on the truck. In the video, he comments on the simplicity of the installation and the noticeable sound differences.
“The cool thing about this intake is it does not require a tune so it’s literally just bolt-on-and-go.”
– GuitarmageddonZL1
Our cold air intake not only changes the throaty sound of the V8 but helps the engine make more power. Each intake system is built for a specific vehicle, allowing it to provide the ideal amount of airflow for the engine. This allows more efficient combustion in the engine, leading to improvements in horsepower and fuel economy. Even though most V8 trucks already provide great power to the wheels, the extra performance comes in handy when pulling a trailer or hauling a heavy load.
Cold Air Induction’s Performance Is In The Details
There are many great-looking air intakes on the market, but nothing matches the performance and engineering of our intake systems. That’s because each kit is designed and tested to fit a specific vehicle and provides a tight fit to keep the engine compartment’s hot air out of the intake.
“They measure with a scaled 3D measurement, so it fits perfectly – it’s a tight fit because of that and takes some finesse – but once you get it in, it’s awesome. A perfect fit.”
– GuitarmageddonZL1
Additionally, each system comes with the following:
OEM-spec tubing, fasteners, and connectors for the crankcase breather tube
High-quality, reusable eight-layer cotton fiber air filter
Plexiglass inspection window
Powder-coated aluminum components to reduce intake temps
Perfectly insulated air boxes to maximize cold airflow
In most cases, it only takes a few tools and 15-20 minutes to install one of our cold air intakes. However, you’ll immediately notice the improved power, throatier sound, and increased fuel economy.
Why Choose A Cold Air Inductions Intake?
Cold Air Inductions are designed and engineered for specific vehicles to deliver noticeable improvements over stock performance. Every one of our kits is tested to verify performance gains and comes with a lifetime warranty.
Contact us to order your CAI cold air intake kit today.
https://www.coldairinductions.com/wp-content/uploads/2017/08/cai-intake.jpg9981800coldaihttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngcoldai2023-12-27 10:41:002023-11-01 11:42:20The First Performance Mod You Should Do On Your Truck
Upgrading your stock air intake comes with several benefits. And, yes, an improved intake sound is one of them. In this blog we will examine why this happens and how it affects your vehicle.
What Does A Cold Air Intake Do?
Increases power
Improves fuel economy
Enhances intake sound
A properly designed cold air intake does exactly what it says on the box. It allows cold air to be sucked into the engine.
Cold air is dense, which means more oxygen for your engine. The end result is more power and better fuel economy. And, of course, a deeper, more aggressive intake sound.
How Does The Intake Sound Change?
Deeper, sportier sound at full throttle
No drone or noise when cruising
The less restrictive design of our cold air intake systems allows more air to be sucked into the engine. This results in a more pronounced intake sound, adding a sporty edge to your vehicle.
Unlike most aftermarket intakes, there is little to no difference in the sound at part throttle or when cruising. Our customers love the way the intake sound transforms their vehicles.
“Looks and sounds great! Very easy to install.”
– John B. (After installing a CAI kit in his Chevy Camaro)
The Limitations Of Stock Intakes
Stock intake systems are designed and engineered to meet 3 very manufacturing guidelines. They must:
Meet prevailing regulations
Be cost-effective to make
Be easy to install
An auto manufacturer must design an air intake that is cost-effective and easy to install on an assembly line. It must also meet regulations in the markets where it will be sold.
The end result is a stock intake that is severely restricted. Most are made of non-insulated plastic and have restrictive designs that suck in hot air and have little to no intake sound.
Why You Should Upgrade To A CAI Cold Air Intake
At Cold Air Inductions, we develop cold air intakes that work with specific vehicles. Our designs are not restricted by the traditional manufacturing guidelines outlined above. We also test our systems in real-world conditions to deliver results you can feel and hear, mainly:
Enhanced performance
Improved economy
More pronounced intake sound over OEM system
Easy to check reusable air filter with handy inspection window
OEM quality and look
Lifetime Warranty
Real-world testing for real-world performance
Upgrading to a CAI Cold Air Intake is quick and easy, thanks to our custom-designed products and simple installation procedure. Our intakes are built to last, and the reusable air filter element will save you money over a stock system.
Cold Air Inductions has been a leading manufacturer of sealed air box intake systems since 2004. We offer a lifetime warranty. Check out our range of high-quality intakes here. Then, contact our team to order a Cold Air Inductions kit for your ride that sounds as good as it performs.
https://www.coldairinductions.com/wp-content/uploads/2023/11/intake-installed.jpg285640coldaihttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngcoldai2023-12-20 11:51:002023-11-01 11:28:48Will Upgrading My Cold Air Intake Improve Sound?
There’s nothing like a CAI cold air intake to boost performance and unleash your ride’s intake sound. But don’t take our word for it. Rather, take a look at what Steve from Hammerdown Motorsports thinks when he installs our intake in his 2017 GMC Yukon Denali.
“This is a must-have for any vehicle.”
Steve, Hammerdown Motorsports
In this post, we cover his video review of our CAI cold air intake install. After all, the proof of a good product is how it performs in real-life situations. Watch the Hammerdown Motorsports video below.
The Yukon Denali CAI Kit
Aside from a Corsa Sport exhaust system, Steve’s 2017 GMC Yukon Denali was just as the factory intended. But it didn’t stay that way for long, as the CAI kit was the next upgrade for his vehicle. This CAI intake system kit includes:
Insulated Aluminum Air Box
Air Box Lid with Clear Inspection Window
Thermal-Coated Intake Tube
High-Performance Air Filter
Black Silicone Coupler / Stainless Clamps
Installation Instructions
After he unboxed the kit, it was time to remove the factory intake system.
Factory Intake Removal
Getting the original intake system off didn’t take long and only required a flathead screwdriver and a ratchet set:
First off, Steve unplugged the Mass Airflow Sensor (MAF), removed some clamps, and disconnected a couple of hoses.
Then, the factory airbox was removed with an 8mm ratchet.
The lower section of the airbox was secured with rubber grommets, so it just required a good pull to get free.
Then, the brace over the coolant reservoir was unbolted (13mm ratchet) in preparation for the CAI kit
Installing The CAI Intake
Once the old system had been removed, it was time for the CAI kit to be fitted.
The new fully insulated airbox went in first. It is designed to fit perfectly into the original airbox cavity, so no drilling or cutting is required.
Next up was the black silicone coupler, already fitted with the required stainless steel clamps. All the existing hoses fit straight on.
The thermal coated intake tube was then connected between the airbox and coupler. Steve also fitted the air filter before tightening it all up to ensure it all fit perfectly.
The final step was to refit the factory MAF sensor, fit the air filter cover, refit the brace, and tighten all the clamps.
First Impressions
With everything fitted, it was time to start it up. Steve immediately noticed how the intake noise sounded stock when cruising but emitted a deep growl under hard acceleration. The subtle vibration through the gas pedal gave it a whole new feel, too.
“That is a night and day difference.”
Steve, Hammerdown Motorsports
Steve loved how much better it sounded and commented that it wasn’t just great on his 6.2-liter Yukon but was a definite must-have for any vehicle. This kit is designed to fit several different vehicles including:
Upgrade Your Vehicle With A CAI Cold Air Intake Kit
“I can’t imagine driving the Yukon without it at this point – it’s so much fun.”
Steve, Hammerdown Motorsports
At Cold Air Inductions, we do real power testing and deliver real power gains. Every kit is built to the highest quality with OEM-quality fittings, and all original sensors are retained. We believe in our products, so we offer a lifetime warranty.
Our intake kits are designed and engineered for specific vehicles. This is why we deliver noticeable improvements over stock. So, contact us today and experience the benefits of a CAI cold air intake kit.
https://www.coldairinductions.com/wp-content/uploads/2019/09/yukon-install.jpg9102336coldaihttps://coldairinduc.wpengine.com/wp-content/uploads/2018/02/Cold-Air-Induction-Systems.pngcoldai2023-12-06 13:02:002023-11-01 11:28:34Hammerdown Motorsports Installs CAI Intake On A GMC Yukon Denali
The Chevy Silverado is a great truck. It’s reliable, tough, and comes with plenty of options. But there are some great upgrades that you can’t get from the factory. In this blog, we look into the five easiest upgrades you can make to your Silverado.
Whether you have a 5.3 or 6.2-liter V8 under the hood, there’s one thing your Silverado will be missing. And that’s a free-flowing exhaust system to unleash the sound of your motor. There are plenty of reputable exhaust specialists out there that offer bespoke systems for the Silverado and offer:
Better exhaust sound
More power
Improved fuel economy
Make sure to get a cat-back system rather than just a replacement rear muffler. That way, you get more power and better fuel economy, too.
Keep In Mind:Some exhausts can drone at cruising speeds, so try to drive to a vehicle equipped with the system you want first.
The ECU in a modern car controls everything from ignition to timing and fuel delivery. Manufacturers use generic ECU settings that can often be reprogrammed to deliver:
Better performance
Smoother power delivery
Better gas mileage
An ECU remap on its own may not deliver a major performance boost. But it is certainly worthwhile if you have done other mods to your truck, too.
Keep In Mind:You could invalidate your factory warranty with certain ECU remaps.
If you enjoy heading off-road, then upgrading the suspension with components like leveling kits or lift kits can enhance your truck’s capabilities and give you:
Better off-road ability
Enhanced protection for the underside of the truck
Installing more capable shock absorbers and taller springs will give you an edge on tough trails.
Keep In Mind:An overly stiff suspension can make for a hard ride on the road.
A tire upgrade is often done in conjunction with suspension improvements and can:
Enhance the look of your truck
Provide more ground clearance
Larger tires will improve ground clearance. And you can choose between on and off-road tread types to enhance grip levels. Upgraded alloy wheels can also give your truck a unique look.
Keep In Mind:Very low-profile tires look cool but can make the ride hard.
5. Cold Air Intakes
One of the best and easiest upgrades you can do is to install a cold air intake. Unlike the other options here, it can be done in your driveway. Cold Air Inductions intake kits are designed to work specifically with your vehicle and will give you:
Better intake sound
Improved performance
Better fuel economy
This results in real power gains that you can feel. And the enhanced intake sound is just icing on the cake. The increased airflow into the engine allows it to perform more efficiently. So your fuel economy will improve, too.
Keep In Mind:Only a high-quality aftermarket sealed airbox intake system will deliver these results.
Upgrade Your Vehicle With A CAI Cold Air Intake Kit
While we can’t comment on aftermarket exhausts, ECUs, or suspension kits, our cold-air induction kits are built to deliver. At Cold Air Inductions, we do real power testing and deliver real power gains. Every kit is made from the highest quality materials and crafted right here in the USA.
We don’t change OEM sensors or connections. And we believe in our products, so we offer a lifetime warranty. Our intake kits are designed and engineered to work with specific Silverado models. This is why we deliver noticeable improvements over stock. Contact us today and experience the benefits of a CAI cold air intake kit.
Do All Air Intake Systems Provide Performance Gains?
/in Press /by James NewsomeEver wondered how much of a difference a high-quality cold air intake can make on your Pontiac GTO? This video from DiabloFormula Racing dives into the transformative power of CAI’s Cold Air Intake system, showcasing noticeable performance gains.
Let’s break down the key highlights and takeaways from the test.
The Power Of Cold Air: A Closer Look
Installing the wrong cold air intake may be even worse than sticking with a stock unit. Many aftermarket intake systems are made from injection-molded plastic and are not sealed or insulated, which can actually reduce your car’s performance. At Cold Air Inductions, our kits include:
We also retain the stock OEM sensors, making our kits easy to install in just about 30 minutes. Every cold air intake system is built to the highest quality – that’s why we’re a Tier 1 OEM supplier. Our intakes are tested to ensure they deliver real performance gains, including:
Seeing Is Believing: The Video Breakdown
In this video, DiabloFormula Racing takes us through the journey of upgrading a 2005-2006 Pontiac 6.0L V8 GTO with a CAI Cold Air Intake. The GTO was tuned and dyno-tested before the CAI intake installation. After installation, the GTO saw an increase of 5hp and 3ft-lbs of torque without ANY additional tuning. From unboxing to the final roar of the engine, it’s a testament to the tangible benefits of quality aftermarket parts.
Take Your GTO To The Next Level
Ready to experience these benefits on your Pontiac GTO or other performance vehicle? Check out our selection of cold air intakes and find the perfect fit. With CAI, you’re not just upgrading your car; you’re getting the following benefits that will enhance your driving experience:
For more information and to view our full range of products, visit Cold Air Inductions or click the button below.
The First Mods You Should Make On A Chevy Camaro
/in Press /by James NewsomeIf you own a fifth- or sixth-generation Camaro, there are plenty of great mods you can do to enhance its performance and looks. Even a base Camaro is a potent vehicle, the 3.6-liter V6 pumps out between 304 and 335hp depending on the model year, and the 6.2-liter V8 makes up to 455hp in stock form. The supercharged V8, meanwhile, delivers a sledgehammer 650hp.
But more is always better, and Motor Fire put together a great video showing five of the best mods that will give you the extra power and visual edge to let your Camaro stand out from the crowd.
1.) A Cold Air Inductions Intake System
There’s simply no better or quicker way to enhance the intake sound and performance of your Camaro than with a CAI Cold Air Induction System. Thanks to precision engineering and comprehensive installation instructions, our CAI intakes can be installed in minutes and show gains of 11 rear wheel horsepower on average. We stock intakes for a wide variety of 5th and 6th Gen Camaro models:
Check out this video by Motor Fire, demonstrating the benefits of our CAI cold air intake in 6th Gen V8 Camaro:
For a stock look that takes just minutes to install, the CAI cold air intake is your only choice. Motor Fire mentions that you get better throttle response, more power, and improved fuel economy. All without needing to tune the ECU.
2.) Oil Catch Can
The second-best upgrade is also under the hood. It is an oil catch can that reduces carbon build-up on the intake valves and increases air turbulence to improve oil separation. It’s one of the cheapest and best mods you can do to extend the life of your engine. Installation time is just 20 minutes.
3.) Aftermarket Exhaust
Replacing your restrictive stock exhaust with a free-flowing aftermarket system will improve your car’s exhaust sound and unleash a few more horses in the process. Doing a full cat-back exhaust isn’t a cheap upgrade, but it is the most comprehensive way to add power and unleash your Camaro’s sound. After all, you get what you pay for.
A more cost-effective route is to do an axle-back muffler replacement. This will enhance the exhaust sound and the upgraded tailpipe tips will look great, too. There are plenty of different systems out there, so pick the one that works best for you.
4.) New Wheels
Replacement wheels aren’t going to enhance your Camaro’s acceleration, but they will definitely improve its looks. Motor Fire recommends Z28 wheels because they look great on any Camaro, but if your budget is tight, powder coating factory wheels is also an option.
Fitting larger diameter or wider wheels will really enhance your car’s looks and can also improve handling and grip levels. Just remember that fitting very low profile tires can make the ride much harder over bumps.
5.) Body Kits and Ground Effects
Some Camaros come with aero components from the factory. If yours didn’t, adding them to a stock car can instantly enhance the aesthetics of even a base V6 Camaro.
Adding splitters, side skirts and a rear wing can give your car a very racy and aggressive look, and unless you go for a pure carbon-fiber option, it can also be reasonably cost effective.
Get The Best Cold Air Intake On The Market For Your Camaro
Whatever upgrade you plan for your Camaro, make sure to install a cold air intake first. Cold Air Inductions is the leading manufacturer of sealed air box intake systems, and we offer a lifetime warranty. We use real-world dyno testing procedures to deliver real-world benefits. Our systems fit without any changes to the OEM sensors or connections.
Check out our range of high-quality Camaro intakes here. Then contact our team to order the cold air induction kit that delivers on its promises.
What Does It Mean To Be A Tier 1 OEM Supplier?
/in Press /by coldaiWhen it comes to aftermarket cold air intakes, performance enthusiasts are spoiled for choice. However, not all cold air intakes are created equal. Some air intakes are made by companies that supply parts to OEMs (like we do).
Our journey from an aftermarket innovator to a tier 1 OEM supplier is a testament to our commitment to quality and innovation. In this blog post, we’ll explore what it means to be a tier 1 OEM supplier, why we don’t make our cold air intake kits out of plastic, and how these things make our products different.
What It Means To Be A Tier 1 OEM Supplier
First, let’s clarify what a Tier 1 OEM supplier is:
Being an OEM supplier is great, as it means you make a quality product. But being a Tier 1 supplier is better: Not only are you making a high quality product, you’re also certifying that every one of your products will meet the automaker’s very high standards.
A typical OEM supplier will send parts to someone else, and then that party will do the testing and the quality control. Typical OEM suppliers have a little bit of latitude to make mistakes. Tier 1 suppliers (like our company) have no latitude. The buck stops with us.
It’s hard to become a Tier 1 supplier, and even harder to maintain that status. Most companies don’t bother, and we think that says something about their commitment to quality.
Here’s Why The Quality Of Every Intake Really Matters
A lot of people think about air intake kits the same way they think about plumbing: A bigger air intake tube can flow more air, so a bigger intake is better.
However, the size of the air intake tube is basically determined by engine displacement: At wide open throttle (WOT), your engine can only use a specific volume of air. Bigger engines need bigger intake tubes, and smaller engines need smaller intake tubes. Any inconsistency in the size of the tubing is bad:
In other words, what you really really want from your air intake tube is precision. The air intake tube needs to flow a very specific volume of air. That means the tube needs to have a uniform thickness and cross-sectional area from one end to the other. Any variations or inconsistencies will change air flow and impact performance.
And Here’s Why We Don’t Make Our Intakes From Plastic
So we told you all of that business about being a tier 1 supplier and air intake tubing to tell you this: It’s very very difficult to make a quality air intake tube out of plastic without spending a lot of money.
1. Factory Air Intakes Are Almost Always Injection Molded Plastic
Most OEM air intakes are injection molded plastic for a couple of reasons:
The trouble is that injection molds are extremely costly – $1 million+ per mold. If you’re an automaker manufacturing hundreds of thousands of parts with the same mold, the cost per piece is pretty good. But if you’re a small aftermarket air intake manufacturer? You can’t afford to spend millions on molds.
2. Most Aftermarket Air Intakes Are Roto-molded Plastic
Rotational molded plastic (aka roto-molded plastic) is what most companies use for their air intake tubing because roto-molding is a very affordable. A roto-mold costs 1/20th as much as an injection mold. This means that, instead of spending $1 million on an injection mold like an automaker would, after-market air intake manufacturers spend $50,000+ on a roto-mold.
The trouble is, roto-molding is very inconsistent. Roto-molding works by pouring hot plastic into a mold and then spinning the mold as the plastic cools. In theory, the plastic will cool uniformly and piece will be good enough. In reality:
As a Tier 1 supplier, we can not make air intake tubes out of roto-molded plastic. Our product would never pass quality control. It would be too inconsistent from kit to kit: Some people would get a kit that was perfect sized and worked great, and some people would get a kit that flowed the wrong amount of air and didn’t work at all.
By the way, if you’ve ever wondered why some people say the cold air intake kits are great, and other people say they don’t work or don’t make a difference, now you know why.
3. Also, Plastic Is An Insulator That Retains Heat
The other reason we don’t use plastic: It’s an insulator. As the engine compartment warms up, any plastic under the hood warms up too. And once a plastic air intake tube warms up, it stays warm because it’s an insulator.
Of course, a metal intake tube under the hood will also warm up. However, metal doesn’t have the insulating properties of plastic. As more air flows into the engine, the air intake cools down. And here at Cold Air Inductions we also thermally insulate our air intake tubing with a special coating, further improving the thermal properties.
Here’s What To Look For In A Cold Air Intake Kit
We might be a little biased, but we think these are the qualities of a great cold air intake kit.
1. Metal Construction. Metal has better thermal properties than plastic. It’s also stronger and will last longer than roto-molded plastic, which can shatter or crack over time.
2. Consistent Intake Tube Diameter: Air intake tube diameter is arguably the most important aspect of a performance air intake. If the tube flows a little too much air – or not quite enough – it will not perform correctly at wide open throttle (WOT). Roto-molded plastic air intake kits have a lot of problems with oversize or undersize tubing because of the way they’re made. In fact, almost all roto-molded parts have a section that’s too thin or too thick, throwing off the air flow by a significant amount.
3. Lifetime Warranty. If an air intake is well made, it should last the lifetime of the vehicle or longer. And a good Lifetime Warranty should NOT have exclusions for normal off-road use, track use, or commercial use. A “lifetime” warranty with a bunch of exclusions isn’t.
4. Premium Reusable Air Filter That’s Made In The USA. Several companies offer engine air filters that are re-usable, but it’s important to verify the filter itself is Made in the USA. Imported filters often use inferior quality filter media to keep costs down, but the consequence of a cheap air filter is either poor performance or poor filtration. Poor performance is no fun; poor filtration can cause long-term engine damage. We wouldn’t ever recommend an air intake kit without a US-made air filter.
We’re A Tier 1 Supplier Because We Make A Great Product
Finishing where we started, the secret to our success as a company has been our dedication to quality and innovation. And the evidence of our dedication is our status as a tier 1 OEM supplier.
Being a tier 1 supplier isn’t easy. A lot of companies can’t or won’t do it because of the strict quality requirements. But every one of our products is designed and manufactured to meet or exceed rigorous specs, and we document every step of the process.
We know we’re biased, but we think we make the best quality cold air intake kits in the industry. Our customers rate our products very highly, and we do business with some of the biggest automakers in the world. Why buy from anyone else?
Back To Back Test: CAI Intake On A 2016 Camaro SS
/in Press /by coldaiPerformance cars are built with high quality parts, but that doesn’t mean that there isn’t room for improvement. The sixth generation Chevy Camaro SS is already an impressive performer. It comes stock with a 455hp 6.2-liter V8 that can launch it from 0-60mph in just 4.5-seconds.
It can also cover the quarter mile in just over 12-seconds. That’s quick even for modified V8s. Bad Bowtie Productions decided to take their 2016 Camaro SS to the dragstrip to find out what it would do stock. Then they installed a CAI Cold Air Intake to see whether it made a difference. Read on to find out.
Stock Runs
First off, they did three stock passes to get a baseline:
The baseline average works out to an elapsed time of [email protected]. Those are pretty healthy numbers for a bone stock Camaro SS. Clearly the track surface and car were as good as it was going to get. The car was left to cool down for an hour, during which the CAI Cold Air Intake was installed. The entire process took just 15 minutes with basic tools.
It was then driven straight to the drag strip without waiting for the ECU to recalibrate to the additional airflow.
CAI Intake Runs
The Bad Bowtie Productions crew then did three passes with the new CAI kit installed and reached an average elapsed time of [email protected]:
Every run was quicker than the fastest stock time, and while the overall improvement was just under 0.1-seconds, that should equate to a 10-15hp increase on a car like the Camaro SS. Not bad for a 15-minute upgrade that also enhances the intake sound in the process.
The Cold Air Inductions Difference
There are plenty of cold air induction kits on the market. What makes CAI stand out is the attention to detail and quality of every product we sell. Every kit is supplied with everything you need for a hassle-free installation. We use OEM-quality fittings and keep all original sensors.
Order Your CAI Intake Kit Today
Upgrading to a CAI Cold Air Intake is quick and easy thanks to our custom designed products and simple installation procedure. Our intakes are designed to last, and the reusable air filter element will save you money, too. Our popular 6th Gen Camaro intakes include:
Whether you choose the Elite Carbon Series intake systems like Bad Bowtie Productions did for their Camaro SS, or the Elite Series intakes, CAI products are the perfect upgrade for any OEM setup.
Cold Air Inductions is a leading manufacturer of cold air intakes. And we stand by our products with a lifetime warranty. Get in touch with our team to order your kit today.
Easy Camaro Power Adder: The Cold Air Inductions Intake
/in Press /by coldaiThe Chevrolet Camaro ZL1 is one heck of a car. It’s responsive, powerful, and has the speed to back up its incredible looks. But if you own one, you’re probably always looking for ways to improve it, get a little more performance, or make it really stand out.
An easy way to accomplish all of that is with our Elite Carbon Series cold air intake. In the video below, we turn to Lonestar Hawaiian on YouTube for an in-depth look at installing this system in his dream car, the Camaro ZL1.
Check Out The Carbon Elite CAI Camaro Cold Air Intake
As Lonestar Hawaiian says, this cold air intake is a great way to add a little carbon fiber to your life. It fits any 2017 to 2021 Chevy Camaro ZL1 with a 6.2-liter V8 engine and comes with an airbox, intake tube, air filter, coupler, stainless steel clamps, and installation manual. The airbox features a clear plexiglass window that helps you monitor the condition of your air filter and adds some major style points when you pop the hood.
The Elite Carbon Series takes that style to a whole new level. The system produces the same great benefits as the Elite Series system, but the air box and intake tube pieces are constructed from carbon fiber, which looks great and is lightweight, strong, and resistant to temperature changes. It naturally maintains a cooler temperature than a metal or plastic intake, which improves your power and fuel efficiency even more, making it the perfect solution for your Camaro.
Installing A Cold Air Inductions Camaro Cold Air Intake
Installing one of our cold air intake systems for your Camaro is pretty simple, typically requiring less than 30 minutes to complete the following steps:
If you watched Lonestar Hawaiian’s video, you saw that one of the best features of this cold air intake system is that it is designed to bolt right into place. In practically no time, he had it hooked up and his Camaro back on the road.
Lonestar Hawaiian notes in his video that it may not dramatically change your fuel economy. But who cares about gas efficiency when you’re talking about increasing power and performance?
Why Should You Have A Camaro Cold Air Intake?
No matter how you slice it, the Chevrolet Camaro ZL1 is one heck of a car. It’s powerful, fast, responsive, and looks incredible. A cold air intake is a ridiculously easy way to eke out a little more performance, particularly our Elite Carbon Series cold air intake.
Cold Air Inductions has been a leading manufacturer of sealed air box intake systems since 2004. We offer a lifetime product warranty and do real power testing to ensure our intake kits deliver noticeable improvements over stock performance.
Contact us to order your Camaro CAI cold air intake kit today!
Five Simple Chevy Camaro Aftermarket Upgrades
/in Press /by coldaiIf you’re a proud owner of a Chevy Camaro and looking to enhance its performance and style, upgrading certain components can make a significant difference. From boosting horsepower to improving aesthetics, these upgrades can transform your Camaro into something unique.
Among the various options available, a cold air intake from Cold Air Induction (CAI) stands out as the top choice, but other things may also improve your Camaro, including suspension upgrades, new wheels/tires, body kits and window tint. Let’s delve into the benefits of each upgrade.
1. Suspension Upgrades: A Better Handling Ride
Upgrading the suspension of your Chevy Camaro is a surefire way to enhance both handling and ride quality. Performance-oriented suspension components like upgraded shocks, struts, springs, and sway bars can minimize body roll, improve cornering ability, and provide a more responsive and comfortable ride. By investing in a quality suspension upgrade, you’ll experience improved stability and control during aggressive driving, making your Camaro a joy to maneuver on the road or track.
2. Wheels and Tires: Amping Up Style And Performance
Swapping out the factory wheels and tires for high-performance counterparts can not only elevate the aesthetics of your Camaro but also enhance its grip and handling. Performance wheels made from lightweight materials reduce unsprung weight, leading to better acceleration, braking, and cornering capabilities. Pairing these wheels with high-performance tires engineered for improved traction and grip completes the package, allowing you to fully exploit your Camaro’s power and performance potential.
3. Performance Intakes: Boosting HP And Sound
One of the most gratifying upgrades for any Camaro owner is a cold air intake system. A high-quality intake kit optimizes air flow, allowing the engine to breathe more freely. This results in increased horsepower and torque, accompanied by a more pronounced engine sound (especially when you step on it) that exudes power and performance. Besides the performance gains, a well-designed intake kit can turn heads and give your Camaro engine bay an stand-out look. You can check out Cold Air Inductions high-quality intake intake kits for Camaros here.
4. Window Tint: Enhancing Aesthetics And Comfort
While not directly related to performance, window tinting is an upgrade that adds to the overall appeal and comfort of your Chevy Camaro. Tinted windows provide several benefits, including blocking harmful UV rays, reducing glare, and enhancing privacy. Additionally, window tinting helps regulate the interior temperature by minimizing heat buildup, ensuring a more comfortable driving experience, especially during hot summer months.
5. Body Kits: A Sleek And Unique Look
Body kits are meticulously designed to reduce air resistance, allowing the car to achieve better speed and fuel efficiency. They also help in channeling airflow in a manner that can keep the vehicle more grounded, providing enhanced stability at high speeds. Adding components such as front and rear bumpers, side skirts, and sometimes even a spoiler, provide a more aggressive and sporty look to the Camaro, making it stand out on the road. Besides the functional benefits, a body kit can significantly increase the resale value of the car, appealing to enthusiasts who appreciate a customized appearance.
Camaro Cold Air Intake Kits From Cold Air Inductions
Cold Air Induction systems are designed to provide noticeable performance improvements for the Chevy Camaro and come with a lifetime warranty. Our cold air intakes replace the stock intake with a more efficient design, drawing cooler air into the engine and increasing both horsepower and torque. By optimizing airflow, a CAI system helps your Camaro breathe easier and perform at its peak, improving throttle response and overall engine efficiency.
Contact us to order your CAI cold air intake kit today.
The First Performance Mod You Should Do On Your Truck
/in Press /by coldaiCold air intakes are an inexpensive way to increase your truck’s performance, providing better towing and gas mileage while improving its sound. The key is finding a high-quality system that cools and improves airflow.
That’s why GuitarmageddonZL1 chose an intake system from Cold Air Inductions and says it should be the first performance mod on your truck. We’ll cover the highlights of their video in this post and explain what makes our cold air intakes stand out from the competition.
Cold Air Inductions Chevy Silverado Intake Install
GuitarmageddonZL1 installed a Cold Air Inductions cold air intake on his new Chevrolet Silverado, which was the first performance modification he did on the truck. In the video, he comments on the simplicity of the installation and the noticeable sound differences.
Our cold air intake not only changes the throaty sound of the V8 but helps the engine make more power. Each intake system is built for a specific vehicle, allowing it to provide the ideal amount of airflow for the engine. This allows more efficient combustion in the engine, leading to improvements in horsepower and fuel economy. Even though most V8 trucks already provide great power to the wheels, the extra performance comes in handy when pulling a trailer or hauling a heavy load.
Cold Air Induction’s Performance Is In The Details
There are many great-looking air intakes on the market, but nothing matches the performance and engineering of our intake systems. That’s because each kit is designed and tested to fit a specific vehicle and provides a tight fit to keep the engine compartment’s hot air out of the intake.
Additionally, each system comes with the following:
In most cases, it only takes a few tools and 15-20 minutes to install one of our cold air intakes. However, you’ll immediately notice the improved power, throatier sound, and increased fuel economy.
Why Choose A Cold Air Inductions Intake?
Cold Air Inductions are designed and engineered for specific vehicles to deliver noticeable improvements over stock performance. Every one of our kits is tested to verify performance gains and comes with a lifetime warranty.
Contact us to order your CAI cold air intake kit today.
Will Upgrading My Cold Air Intake Improve Sound?
/in Press /by coldaiUpgrading your stock air intake comes with several benefits. And, yes, an improved intake sound is one of them. In this blog we will examine why this happens and how it affects your vehicle.
What Does A Cold Air Intake Do?
A properly designed cold air intake does exactly what it says on the box. It allows cold air to be sucked into the engine.
Cold air is dense, which means more oxygen for your engine. The end result is more power and better fuel economy. And, of course, a deeper, more aggressive intake sound.
How Does The Intake Sound Change?
The less restrictive design of our cold air intake systems allows more air to be sucked into the engine. This results in a more pronounced intake sound, adding a sporty edge to your vehicle.
Unlike most aftermarket intakes, there is little to no difference in the sound at part throttle or when cruising. Our customers love the way the intake sound transforms their vehicles.
The Limitations Of Stock Intakes
Stock intake systems are designed and engineered to meet 3 very manufacturing guidelines. They must:
An auto manufacturer must design an air intake that is cost-effective and easy to install on an assembly line. It must also meet regulations in the markets where it will be sold.
The end result is a stock intake that is severely restricted. Most are made of non-insulated plastic and have restrictive designs that suck in hot air and have little to no intake sound.
Why You Should Upgrade To A CAI Cold Air Intake
At Cold Air Inductions, we develop cold air intakes that work with specific vehicles. Our designs are not restricted by the traditional manufacturing guidelines outlined above. We also test our systems in real-world conditions to deliver results you can feel and hear, mainly:
Upgrading to a CAI Cold Air Intake is quick and easy, thanks to our custom-designed products and simple installation procedure. Our intakes are built to last, and the reusable air filter element will save you money over a stock system.
Cold Air Inductions has been a leading manufacturer of sealed air box intake systems since 2004. We offer a lifetime warranty. Check out our range of high-quality intakes here. Then, contact our team to order a Cold Air Inductions kit for your ride that sounds as good as it performs.
Hammerdown Motorsports Installs CAI Intake On A GMC Yukon Denali
/0 Comments/in Press /by coldaiThere’s nothing like a CAI cold air intake to boost performance and unleash your ride’s intake sound. But don’t take our word for it. Rather, take a look at what Steve from Hammerdown Motorsports thinks when he installs our intake in his 2017 GMC Yukon Denali.
In this post, we cover his video review of our CAI cold air intake install. After all, the proof of a good product is how it performs in real-life situations. Watch the Hammerdown Motorsports video below.
The Yukon Denali CAI Kit
Aside from a Corsa Sport exhaust system, Steve’s 2017 GMC Yukon Denali was just as the factory intended. But it didn’t stay that way for long, as the CAI kit was the next upgrade for his vehicle. This CAI intake system kit includes:
After he unboxed the kit, it was time to remove the factory intake system.
Factory Intake Removal
Getting the original intake system off didn’t take long and only required a flathead screwdriver and a ratchet set:
Installing The CAI Intake
First Impressions
With everything fitted, it was time to start it up. Steve immediately noticed how the intake noise sounded stock when cruising but emitted a deep growl under hard acceleration. The subtle vibration through the gas pedal gave it a whole new feel, too.
Steve loved how much better it sounded and commented that it wasn’t just great on his 6.2-liter Yukon but was a definite must-have for any vehicle. This kit is designed to fit several different vehicles including:
Upgrade Your Vehicle With A CAI Cold Air Intake Kit
At Cold Air Inductions, we do real power testing and deliver real power gains. Every kit is built to the highest quality with OEM-quality fittings, and all original sensors are retained. We believe in our products, so we offer a lifetime warranty.
Our intake kits are designed and engineered for specific vehicles. This is why we deliver noticeable improvements over stock. So, contact us today and experience the benefits of a CAI cold air intake kit.
The 5 Easiest Chevy Silverado Aftermarket Upgrades
/in How To /by coldaiThe Chevy Silverado is a great truck. It’s reliable, tough, and comes with plenty of options. But there are some great upgrades that you can’t get from the factory. In this blog, we look into the five easiest upgrades you can make to your Silverado.
1. Exhaust Systems
Whether you have a 5.3 or 6.2-liter V8 under the hood, there’s one thing your Silverado will be missing. And that’s a free-flowing exhaust system to unleash the sound of your motor. There are plenty of reputable exhaust specialists out there that offer bespoke systems for the Silverado and offer:
Make sure to get a cat-back system rather than just a replacement rear muffler. That way, you get more power and better fuel economy, too.
Keep In Mind: Some exhausts can drone at cruising speeds, so try to drive to a vehicle equipped with the system you want first.
2. ECU Remaps
The ECU in a modern car controls everything from ignition to timing and fuel delivery. Manufacturers use generic ECU settings that can often be reprogrammed to deliver:
An ECU remap on its own may not deliver a major performance boost. But it is certainly worthwhile if you have done other mods to your truck, too.
Keep In Mind: You could invalidate your factory warranty with certain ECU remaps.
3. Suspension Upgrades
If you enjoy heading off-road, then upgrading the suspension with components like leveling kits or lift kits can enhance your truck’s capabilities and give you:
Installing more capable shock absorbers and taller springs will give you an edge on tough trails.
Keep In Mind: An overly stiff suspension can make for a hard ride on the road.
4. Wheels And Tires
A tire upgrade is often done in conjunction with suspension improvements and can:
Larger tires will improve ground clearance. And you can choose between on and off-road tread types to enhance grip levels. Upgraded alloy wheels can also give your truck a unique look.
Keep In Mind: Very low-profile tires look cool but can make the ride hard.
5. Cold Air Intakes
One of the best and easiest upgrades you can do is to install a cold air intake. Unlike the other options here, it can be done in your driveway. Cold Air Inductions intake kits are designed to work specifically with your vehicle and will give you:
This results in real power gains that you can feel. And the enhanced intake sound is just icing on the cake. The increased airflow into the engine allows it to perform more efficiently. So your fuel economy will improve, too.
Keep In Mind: Only a high-quality aftermarket sealed airbox intake system will deliver these results.
Upgrade Your Vehicle With A CAI Cold Air Intake Kit
While we can’t comment on aftermarket exhausts, ECUs, or suspension kits, our cold-air induction kits are built to deliver. At Cold Air Inductions, we do real power testing and deliver real power gains. Every kit is made from the highest quality materials and crafted right here in the USA.
We don’t change OEM sensors or connections. And we believe in our products, so we offer a lifetime warranty. Our intake kits are designed and engineered to work with specific Silverado models. This is why we deliver noticeable improvements over stock. Contact us today and experience the benefits of a CAI cold air intake kit.